| |
G4APL > TECH 30.01.23 20:01l 107 Lines 3446 Bytes #999 (0) @ WW
BID : 15271G4APL
Read: GUEST
Subj: Re: Fw: Yaesu FT-991A: CAT via SCS modems?
Path: IW8PGT<I3XTY<I0OJJ<N6RME<CX2SA<N9PMO<GB7YEW<GB7CIP<GB7CIP<GB7CIP
Sent: 230130/1756Z @:GB7CIP.#32.GBR.EURO $:15271G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.rec.tech
T:Message-Id: <tr8vrs$l82$1@gb7cip.ampr.org>
yt7mpb%yt7mpb.#nsd.srb.eu@gb7cip.ampr.org wrote:
Hello Misco
I think you misunderstood my working
pactor configuration and linfbb (fbb)
You will find a working version my linfbb
configuration files here.
and an example fbb forward file
I have no experience of BPQ
http://gb7cip.ampr.org/pactor_gb7cip.html
or here
https://www.theskywaves.net/pactor_gb7cip.html
too long to add to this 'article'
73 de Paul g4apl
>
> Hi Paul, et al.
>
> I checked the DR-7400's internal storage, but TS-480SAT was not listed.
> I am going to talk with SCS folks about ...
>
>
> Begin forwarded message:
>
> Date: Wed, 25 Jan 23 13:48:12 Z
> From: YT7MPB
> Subject: Re: Yaesu FT-991A: CAT via SCS modems?
>
>
>
> On Mon, 23 Jan 23 15:36:00 Z
> G4APL wrote:
>
>> R:230123/1540Z @:N6RME.#NCA.CA.USA.NOAM #:4191 [El Dorado]
>> $:43374G4APL R:230123/1540z @:I0OJJ.ITA.EU $:43374G4APL
>> R:230123/1540Z @:EA2RCF.EAVI.ESP.EU #:39124 [Vitoria] $:43374G4APL
>> R:230123/1540Z 3149@LU9DCE.TOR.BA.ARG.SOAM LinBPQ6.0.23
>> R:230123/1539Z 65980@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.23
>> R:230123/1539Z 1602@VE3VTY.#CON.ON.CAN.NOAM LinBPQ6.0.23
>> R:230123/1539Z @:PE1RRR.#NBW.NLD.EURO #:8472 [Rijen] $:43374G4APL
>> R:230123/1537Z @:GB7CIP.#32.GBR.EURO #:39036 [Caterham Surrey GBR]
>> $:43374G4APL R:230123/1536Z @:GB7CIP.#32.GBR.EURO [Caterham, IO91WH]
>> Linux mailgw-0.3.1.8 R:230123/1536Z @:GB7CIP.#32.GBR.EURO $:43374G4APL
>> T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
>> T:Newsgroups: ampr.rec.tech
>> T:Message-Id: <tqm9ep$sj1$1@gb7cip.ampr.org>
>>
>> yt7mpb%yt7mpb.#nsd.srb.eu@gb7cip.ampr.org wrote:
>> >
>> > I wonder whether it is possible to control the radio frequency and
>> > other parameters of FT-991 via SCS DR-7400 pactor controller. In
>> > fact, FT-991 is not listed among Yaesu radios (in the controller's
>> > memory/firmware), so I wonder whether someone made it working that
>> > way.
>>
>> Looking at the FT-991A Cat Operation Manual
>> the parameters.
>>
>> The data Look the same format as in the
>> Kenwood's TS-480SAT PC Control Commands manual.
>>
>> When comparing both manuals and control fields
>> I have only use Kenwood TS-480Sats for remote control.
>>
>> the next question
>> Going back to 'Basics'
>>
>> Can you drive the ft991 entering the commands manually
>> as a test using
>> Alpha4
>> or
>> NCWINPTC
>> communication programes
>>
>> and get remote command response via the controller and radio
>> 73 de Paul g4apl/gb7cip
>>
>
> Paul, thank you for information on your Kenwood TS-480SAT. I will try to
> test FT-991 by using TS-480SAT as the parameter in the SCS controller.
> (I did not check yet whether TS-480SAT was listed in the SCS
> internal menu, but suppose it is there.)
>
> By the way, I did not try to test FT-991A by using any of those
> software, and only tried from the command line (minicom in Linux). I
> only got a response from the controller that, for example, the
> frequency was changed, but in reality the radio did not change QRG.
>
> That FT-991A that I used for test was not mine, but from another ham.
> So I need to collect some more info before I ask the other ham to bring
> in the radio from his home location HI HI ...
>
--
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.euro
amprnet http://gb7cip.ampr.org Inet https://www.theskywaves.net
Read previous mail | Read next mail
| |
